Industrial lubricants
ISO VG 68/100/150/220/320/460/680
High quality, heavy duty transmission lubricants, lead-free, with a balanced additives system for protection against high pressures, wear, rust and oxidization, as well as increased oxidizing stability and resistance to foaming. The line is recommended for all types of wet gear wheels. They are also suitable for circulation systems and splash feeding systems. Strongly recommended for gear systems under extremely heavy loads and strong vibrations/jerking. They meet specifications DIN 51517 PART 3 CLP, U.S. Steel 224, David Brown S1.53.101, AGMA 9005-E02 etc.
Specifications
Containers
DIN 51517 Part 3, USS 224, AGMA 9005-EO2, DAVID BROWN
S1.53.101(E)
18L, 205L, 1000L
COMPRESSOR ISO 32/46/68/100/150/220
Air compressor lubricants with exceptional resistance against carbon deposits and oxidization. ISO 46 and 68 fluidity is recommended for the lubrication of rotating air compressors, both screwed and centrifugal, while ISO 68, 100 and 150 fluidity is recommended for single or multi stage reciprocating air compressors. They far exceed the requirements of top manufacturers, such as Atlas Copco, Ingersoll Rand, Sullair etc. They meet the following specifications: DIN 51506 VDL, ISO L-DAA/-DAB/- DAG/-DAH etc.
Specifications
Containers
DIN 51506 VD-L, 51515, 51524 II, 51517 part I & II, AFNOR NF
E 40-603(HL), DENISON HF-1, CINCINNATI P-38/54/55/57,
AGMA 9005-D94
18L, 205L, 1000L
ROCK DRILL ISO 46, 68, 100
Heavy duty lubricants, enhanced with adhesives and high pressure additives. Suitable for pneumatic drills used under high pressure and temperature conditions, in quarries and construction sites.
Specifications
Containers
18L, 205L, 1000L
METAL WORKING FLUID
Universal, emulsifiable cutting fluid which, when mixed with water, produces a white emulsion. It has been enhanced with bactericides, creating an emulsion with increased operating life and stability. Suitable for universal cutting procedures on a wide range of steel alloys, or not, where cooling of the metal is necessary during the procedure. The typical mixing ratio of lubricant to water is 5%. The product must be stored in a cool location. Always add the oil to the water, not the other way around.
Specifications
Containers
Recommended content 1lt in 20-50 liters of water.
4L, 18L, 205L, 1000L