High quality, adhesive lubricant, specifically designed for the lubrication of chainsaw chains and wheels. Manufactured from high viscosity index basic oil,
special adhesive compound and additives against oxidization and wear. Also
suitable for the chains of other machinery, such as motorcycles, lawnmowers
and agricultural equipment.
ΛΑΔΙ ΑΝΤΛΙΑΣ ΚΕΝΟΥ ΑΡΜΕΚΤΙΚΩΝ ΣΥΣΤΗΜΑΤΩΝ- MILKING OIL
Ειδικό συνθετικό λιπαντικό κατάλληλο για την λίπανση της αντλίας κενού των αρμεκτικών μηχανών όλων των τύπων. Εμπλουτισμένο με ειδικά πρόσθετα για τον καθαρισμό και την συντήρηση των αντλιών κενού.
DIN 51524, part 2 and 3 (HLP, HVLP), AFNOR NF E 48-603 (HM, HV), SIS SS 155434, VDMA 24318, Hoesch HWN 2333, Thyssen TH N-256132, CETOP RP 91 H (HM, HV), U.S. Steel 126, 127 and 136, Sperry Vickers M-2950-S and I-286- S, Denison Filterability TP 02100
Automobile windshield cleaning fluid with anti-frost properties. It effectively removes dust, dirt and insect residue, without leaving any marks. It provides anti-freeze protection according to the table.
Dissolve with water in the windshield wipers container. It is recommended to use deionized water.
WASH OIL- METAL WORKING FLUID
Universal, emulsifiable cutting fluid which, when mixed with water, produces
a white emulsion. It has been enhanced with bactericides, creating an
emulsion with increased operating life and stability. Suitable for universal
cutting procedures on a wide range of steel alloys, or not, where cooling of the
metal is necessary during the procedure. The typical mixing ratio of lubricant
to water is 5%. The product must be stored in a cool location. Always add the
oil to the water, not the other way around.
The usual oil to water mixing ratio is 5%. Always, oil should be added to water and not the other way around.
THERMO OIL SAE 30
Lubricant of advanced composition with excellent thermal conductivity, used as a means of particularly high heat transfer rates. It is suitable for closed systems and cooling circuits in all kinds of industrial use (asphalt processing, chemicals, paper, etc.) operating between -10℃ and 300℃.